Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Sanitary Fitting High-Performance Precision Pump Tubing Assembly, PharMed BPT, L/S 24; 10 ft
Applications: Cell and tissue culture work, pharmaceutical, light-sensitive samples Characteristics: Nontoxic, nonhemolytic, extremely low permeability, resists acids, bases, and oxidizing agents; heat-sealable, bondable, formable, opaque beige Requires sanitary gaskets for both connections to ensure quality seal
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 1.14MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 1.14 mm ID; 12/PK, Avantor
Cole-Parmer Diba Omnifit Tubing, PTFE, 1/16" (1.6 mm) OD x 1.0 mm ID; 20 m/pk
Use chemically inert PTFE tubing with virtually all chemicals, solvents, and corrosive materials, even at elevated temperatures. Autoclave tubing or sterilize in-line by steam or chemical methods. Select from 1/16", 1/8", or 3/16" OD tubing with a range of inside diameters.
Microsolv Technology Corporation Tubing, Stainless Steel, Pre-Cut, 0.005" ID, 1/16" OD, HPLC Grade, Red Band, 30cm Long. 1 EA.
Properly cutting tubing is one of the most difficult tasks in a chromatography laboratory. These Pre-Cut Stainless Steel Tubes are the perfect solution.Welded and Annealed, the ends are cut using Electronic Discharge ( EDC ) Technique to achieve square and burr free zero dead volume connections. They are tested according to EN 10204/3.1B. The Red Band is a color code for.005" ID. Internal and Outer Dimension Tolerances: +/- 0.05mm.
Accuflow Systems TUBING MFLEX E-FOOD #17.50FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex Tygon E-Food (B-44-4X) tubing, L/S 17, 50 ft. Applications: Food and beverage processing and dispensing. Characteristics: Nonwetting, odorless, tasteless, and nontoxic. Transparent.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 1/16"" ID X 1/8"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) 3-STP VITON 0.51MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Viton, 0.51 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LAB 1.52MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-Lab, 1.52 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 0.38MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 0.38 mm ID; 12/PK, Avantor